Lowrance HDS-7 LIVE HDS Live Operator Manual - Page 141
EBL/VRM markers, Defining an EBL/VRM marker, Turning EBL/VRM markers on and off
View all Lowrance HDS-7 LIVE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
EBL/VRM markers The electronic bearing line (EBL) and variable range marker (VRM) allows quick measurements of range and bearing to vessels and landmasses within radar range. Two different EBL/VRMs can be placed on the radar image. The EBL/VRMs are by default positioned from the center of the vessel. It is, however, possible to offset the reference point to any selected position on the radar image. Defining an EBL/VRM marker 1. Ensure that the cursor is not active 2. Activate the menu, select EBL/VRM, then select EBL/VRM 1 or EBL/VRM 2 - The EBL/VRM is now positioned on the radar image 3. Select the adjustment option from the menu if you need to reposition the marker - Adjust the marker by dragging it into position 4. Save your settings. Turning EBL/VRM markers on and off When an EBL/VRM marker is positioned, you can turn the EBL/VRM on/off by: • deselecting the marker from the menu Placing EBL/VRM markers by using the cursor 1. Position the cursor on the radar image 2. Activate the menu 3. Select one of the EBL/VRM markers - The EBL line and the VRM circle are positioned according to the cursor position. Offsetting an EBL/VRM marker 1. Ensure that the cursor is not active 2. Activate the menu, select EBL/VRM, then select the marker you wish to offset 3. Select the set offset option 4. Position the cursor on the radar panel to set the offset position 5. Select the save option to save your settings. Radar| HDS Live Operator Manual 141