Lowrance HDS-7 LIVE HDS Live Operator Manual - Page 55
Dock-to-dock Autorouting and Easy Routing
View all Lowrance HDS-7 LIVE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Dock-to-dock Autorouting and Easy Routing The Dock-to-dock Autorouting and Easy Routing suggest new routepoint positions based on information in the map and on your boat's size. Before you can start using this feature the boat draught, width and height must be entered into the system. The boat settings dialog is automatically displayed if the information is missing when you start the feature. To enter boat settings, refer to "System settings" on page 177. Ú Note: It is not possible to start the Dock-to-dock Autorouting or Easy Routing if one of the selected routepoints is located in an unsafe area. A warning dialog is displayed, and you have to move the relevant routepoint(s) to a safe area to proceed. Ú Note: If no compatible cartography is available, the Dock-todock Autorouting or Easy Routing menu option is not available. Compatible cartography includes C-MAP MAX-N+, Navionics+ and Navionics Platinum. For a full selection of available charts, visit www.gofreemarine.com, www.c-map.com or www.navionics.com. 1. Position at least two routepoints on a new route, or open an existing route for editing. 2. Select the Dock-to-dock Autorouting menu option, followed by: - Entire Route - if you want the system to add new routepoints between the first and the last routepoint of the open route. - Selection - if you want to manually select the routepoints that define the limits for the autorouting, then select the relevant routepoints. Selected routepoints are colored red. Only two routepoints can be selected, and the system discards any routepoints between your selected start and end points. 3. Select the accept option to start the automatic routing. Waypoints, routes, and trails | HDS Live Operator Manual 55