Lowrance HDS-7 LIVE HDS Live Operator Manual - Page 94

Zooming the image, SpotlightScan setup, Calibrating the heading sensor to the trolling motor

Page 94 highlights

Zooming the image You can zoom the image by: • using the zoom (+ or -) buttons • using the +/- keys The zoom level is shown on the bottom left side of the image. SpotlightScan setup Calibrating the heading sensor to the trolling motor You must calibrate the heading sensor with the trolling motor foot pedal. 1. In the device list dialog, select the heading sensor (SLS-100) 2. Select Calibrate on the device information dialog 3. Select your trolling motor foot pedal 4. Select Calibrate 5. Select OK on the confirmation dialog. Aligning the SpotlightScan image You must align the SpotlightScan image with the direction the trolling motor is pointing. If the image is not correctly aligned with the trolling motor, the orientation of the image does not match the underwater environment around your boat. 1. Position your trolling motor so it is pointing straight ahead 2. Select the position adjustment menu option 94 SpotlightScan| HDS Live Operator Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198

Zooming the image
You can zoom the image by:
using the zoom (+ or -) buttons
using the +/- keys
The zoom level is shown on the bottom left side of the image.
SpotlightScan setup
Calibrating the heading sensor to the trolling motor
You must calibrate the heading sensor with the trolling motor foot
pedal.
1.
In the device list dialog, select the heading sensor (SLS-100)
2.
Select Calibrate on the device information dialog
3.
Select your trolling motor foot pedal
4.
Select Calibrate
5.
Select OK on the confirmation dialog.
Aligning the SpotlightScan image
You must align the SpotlightScan image with the direction the
trolling motor is pointing. If the image is not correctly aligned with
the trolling motor, the orientation of the image does not match the
underwater environment around your boat.
1.
Position your trolling motor so it is pointing straight ahead
2.
Select the position adjustment menu option
94
SpotlightScan
| HDS Live Operator Manual