MSI MPG Z790 CARBON MAX WIFI User Manual - Page 69

Resetting BIOS, Updating BIOS, Updating BIOS with M-FLASH

Get MSI MPG Z790 CARBON MAX WIFI PDF manuals and user guides View all MSI MPG Z790 CARBON MAX WIFI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Resetting BIOS You might need to restore the default BIOS setting to solve certain problems. There are several ways to reset BIOS: ∙ Go to BIOS and press F6 to load optimized defaults. ∙ Short the Clear CMOS jumper on the motherboard. ∙ Press the Clear CMOS button (optional) on the rear I/O panel. ⚠ Important Be sure the computer is off before clearing CMOS data. Please refer to the Clear CMOS jumper/ button section in the user guide for resetting BIOS. Updating BIOS Updating BIOS with M-FLASH Before updating: Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash drive. Updating BIOS: 1. Switch to the target BIOS ROM by Multi-BIOS switch. Skip this step if your motherboard does not have this switch. 2. Insert the USB flash drive that contains the update file into the USB port. 3. Please refer the following methods to enter flash mode. ▪ Reboot and press Ctrl + F5 key during POST and click on Yes to reboot the system. ▪ Reboot and press Del key during POST to enter BIOS. Click the M-FLASH button and click on Yes to reboot the system. 4. Select a BIOS file to perform the BIOS update process. 5. When prompted click on Yes to start recovering BIOS. 6. After the flashing process is 100% completed, the system will reboot automatically. BIOS Setup 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
69
BIOS Setup
Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There
are several ways to reset BIOS:
∙
Go to BIOS and press
F6
to load optimized defaults.
∙
Short the Clear CMOS jumper on the motherboard.
∙
Press the Clear CMOS button (optional) on the rear I/O panel.
⚠
Important
Be sure the computer is off before clearing CMOS data. Please refer to the Clear
CMOS jumper/ button section in the user guide for resetting BIOS.
Updating BIOS
Updating BIOS with M-FLASH
Before updating:
Please download the latest BIOS file that matches your motherboard model from MSI
website. And then save the BIOS file into the USB flash drive.
Updating BIOS:
1.
Switch to the target BIOS ROM by Multi-BIOS switch.
Skip this step if your
motherboard does not have this switch.
2.
Insert the USB flash drive that contains the update file into the USB port.
3.
Please refer the following methods to enter flash mode.
▪
Reboot and press
Ctrl + F5
key during
POST
and click on Yes to reboot the
system.
▪
Reboot and press
Del
key during
POST
to enter BIOS. Click the M-FLASH button
and click on Yes to reboot the system.
4.
Select a BIOS file to perform the BIOS update process.
5.
When prompted click on
Yes
to start recovering BIOS.
6.
After the flashing process is 100% completed, the system will reboot
automatically.