Makita HR3210C Technical Reference - Page 1

TECHNICAL INFORMATION Model No. HR3200C, HR3210C, HR3210FCT Description Rotary Hammer 32mm (1-1/4") CONCEPT AND MAIN APPLICATIONS PRODUCT P 1/ 24 L H HR3200C series models have been developed as successor models of HR3000C, featuring low vibration level and lightweight design. Listed below are specification differences among the three models. W HR3200C HR3210C Model No. AVT Active dynamic vibration absorber Vibration absorbing handle Quick change drill chuck LED Job light HR3200C No No No HR3210C HR3210FCT Yes Yes No Yes No Yes Model No. Length (L) Width (W) Height (H) Dimensions: mm (") HR3200C HR3210C HR3210FCT 398 (15-5/8) 424 (16-3/4) 108 (4-1/4) 114 (4-1/2) 239 (9-3/8) Specification Voltage (V) 110 120 220 230 240 Current (A) 8.6 8.2 4.4 4.4 4.4 Cycle (Hz) 50/60 50/60 50/60 50/60 50/60 Continuous Rating (W) Input Output 850 300 --- 300 850 300 850 300 850 300 HR3210FCT Max. Output (W) 1,100 1,100 1,100 1,100 1,100 Specification Model No load speed: min-1= rpm Impacts per minute: min-1= ipm Shank type Concrete Capacities: mm (") Steel TCT bit Core bit Wood Operation mode Torque limiter Variable speed control by dial Electronic Soft start features Constant speed control Double insulation Power supply cord (m: ft) Net weight: kg (lbs) HR3200C HR3210C HR3210FCT 315 - 630 1,650 - 3,300 SDS-plus 32 (1-1/4) 90 (3-1/2) 13 (1/2) 32 (1-1/4) 3 modes (Rotation only/ Rotation with Hammering/ Hammering only) Yes Yes Yes Yes Yes Europe: 4.0 (13.1), Brazil: 2.0 (6.6), Other countries: 5.0 (16.4) 4.4 (9.7) 4.8 (10.6) 5.0 (11.0) Standard equipment Side handle (Bar-shaped) .... 1 Grease vessel 93G (containing Bit grease 1 Depth gauge 1 Quick change drill chuck (for HR3210FCT only) ..... 1 Note: The standard equipment for the tool shown above may differ by country. Optional accessories Plastic carrying 1 TCT bits (taper shank), Taper shank adapter, Cotter, Core bits, Center bit, Core bit adapter , Rod, Bull points, Cold chisels, Scaling chisels, Grooving chisels, Scraper assembly, Dust cups 5 and 9, Drill chuck assembly,Drill chuck adapter, Drill chuck S13, Chuck key S13, Depth gauge, Blow-out bulb, Grease vessel (containing 30g of Hammer grease), Grease vessel 93G (Containing Bit grease), Safety goggle, Hammer service kit, Quick change drill chuck (for HR3210FCT only)