Makita HR3210C Technical Reference - Page 13

Repair [3] DISASSEMBLY/ASSEMBLY [3] -5. Motor Section, Torque Limiter Section DISASSEMBLY 4) Disconnect connectors to disassemble Handle section as illustrated in Fig. 26. Fig. 26 Disconnect the connector of Lead unit from Controller. Handle section can be separated completely from machine. P 13 / 24 Handle section Controller Disconnect the connector of LED Circuit. Controller and Cord clamp base can be removed from Motor housing by unscrewing 4x18 Tapping screws. Cord clamp base 4x18 Tapping screw: 2 pcs. 5) Disconnect the contact between Carbon brush and Commutator as illustrated in Fig. 27. Fig. 27 Disconnection of the Contact of Carbon brush with Commutator Carbon brush Spiral spring Detach Spiral spring from Carbon brush. By pulling Carbon brush, disconnect the contact with Armature's commutator. Armature is ready to be disassembled. Spiral spring Carbon brush Carbon brush