Marantz NR1602 NR1602N_ENG_CD-ROM_v00 - Page 101

Basic version Advanced version Setting items Add New Feature Display new features that can be downloaded to this unit and perform an update. Setting details Upgrade : Execute the upgrade process. When updating starts, the power indicator becomes red and the menu screen is shut down. The amount of update time which has elapsed is displayed. • If the upgrade is not successful, an error message identical to those in "Firmware Update" will appear on the display. Check the settings and network environment, then update again. Upgrade Status : Display a list of the additional functions provided by the upgrade. See the marantz website for details about updates. When the procedure is complete, "Registered" is displayed in this menu and updates can be carried out. If the procedure has not been carried out, "Not Registered" is displayed. The ID number shown on this screen is needed when carrying out the procedure. The ID number can also be displayed by pressing and holding the main unit's p and MENU for at least 3 seconds. Language Set the language for display on the menu screen. English / Deutsch / Français Setting details System Setup Default settings are underlined. "Language" can also be set by the following procedure. However, the menu screen is not displayed. 1. Press and hold the main unit's MENU and ENTER for at least 3 seconds. "V.Format:" appears on the display. 2. Press the main unit's STATUS and set "Lang:". 3. Press the main unit's o p and set the language. 4. Press the main unit's ENTER to complete the setting. Notes concerning use of "Firmware Update" and "Add New Feature" • In order to use these functions, you must have the correct system requirements and settings for a broadband Internet connection (vpage 14). • Do not turn off the power until updating or upgrading is completed. • Even with a broadband connection to the Internet, approximately 1 hour is required for the updating/ upgrading procedure to be completed. • Once updating/upgrade starts, normal operations on this unit cannot be performed until updating/ upgrading is completed. • Furthermore, updating/upgrading the firmware may reset the backup data for the parameters, etc. set for this unit. • If the update or upgrade fails, press and hold the ON/STANDBY on the main unit for more than 5 seconds, or remove and re-insert the power cord. "Update retry" appears on the display and update restarts from the point at which update failed. If the error continues despite this, check the network environment. • Information regarding the "Firmware Update" function and "Add New Feature" will be announced on the marantz web site each time related plans are defined. • When usable new firmware is released with "Firmware Update" or "Add New Feature", a notification message is displayed on the menu screen. When you do not want to be notified, set "Notification" - "Update" (vpage 95) and "Upgrade" (vpage 95) to "OFF". Information BD 98