Marantz NR1602 NR1602N_ENG_CD-ROM_v00 - Page 87

Basic version Advanced version Manual EQ Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker. "Manual EQ" can be set when "MultEQ®" setting (vpage 82) is "Manual". Setting items Setting details Adjust Channel Correct the tone of each speaker. q Select the speaker tone adjustment method. All : Adjust the tone of all speakers together. L/R : Adjust the tone of left and right speakers together. Each : Adjust the tone of each speaker. w Select the speaker. e Select the adjustment frequency band. 63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz • Select the speakers you want to adjust when "L/R" or "Each" is selected. r Adjust the level. -20.0dB - +6.0dB (0.0dB) Curve Copy Yes : Copy. Copy "Audyssey Flat" curve No : Do not copy. from MultEQ®. Default The "Manual EQ" settings are returned to the default settings. • "Curve Copy" is displayed after Audyssey® Auto Setup has been performed. • When you select "Curve Copy" and press ENTER, the "Set EQ curve to Audyssey Flat?" prompt is displayed. Select either "Yes" or "No", and press ENTER. Yes : Reset to the defaults. No : Do not reset to the defaults. When you select "Default" and press ENTER, the "Return settings to the default?" prompt is displayed. Select either "Yes" or "No", and press ENTER. Audio Adjust M-DAX Default settings are underlined. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The M-DAX function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals. Setting details OFF : Do not use M-DAX. Low : Optimized mode for compressed sources with very weak highs. Middle : Apply suitable bass and treble boost for all compressed sources. High : Optimized mode for compressed sources with normal highs. • This item can be set with analog signals or PCM signal (fs = 44.1/48 kHz) is input. • "M-DAX" settings are stored for each input source. • When set to "OFF", the M-DAX indicator on the front panel switches off. • This cannot be set when the surround mode is set to "DIRECT" or "PURE DIRECT". • This can also be set by pressing M-DAX. • Buttons on the remote control unit can be used for operations. q Press AMP to set the remote control unit to AMP-operation mode. w Press M-DAX. Audio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output. 0ms - 200ms Setting details • This item can be set within the range of 0 to 100 ms when "Auto Lip Sync" (vpage 90) is set to "ON" and when a TV compatible with Auto Lip Sync is connected. • Store "Audio Delay" for each input source. • Audio Delay for game mode can be set when "Video Mode" (vpage 102) is set to "Auto" or "Game". Information BD 84