Marantz NR1602 NR1602N_ENG_CD-ROM_v00 - Page 67
Adjusting the volume of the speakers, Fader function
View all Marantz NR1602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Basic version Advanced version Adjusting the volume of the speakers You can adjust the channel level either according to the playback sources or to suit your taste, as described below. nnAdjusting the volume of the different speakers 1 Press AMP to set the remote control unit to AMP-operation mode. 2 Press CH LVL. Channel Level Front L Front R Subwoofer -8.5dB -11.5dB 0.0dB Subwoofer ON 3 Use ui to select the speaker. The speaker that can be set switches each time one of the buttons is pressed. 4 Use o p to adjust the volume. • You can directly turn "OFF" the subwoofer outputs during 2-channel playback in DIRECT or STEREO mode. Select "Subwoofer" and use o p to select "ON" or "OFF". Channel Level Front L Front R -8.5dB -11.5dB Convenient functions nnAdjusting the volume of groups of speakers (Fader function) This function lets you adjust (fade) the sound all at once from the front (front speaker / front height speaker / center speaker) or rear (surround speaker / surround back speaker). 1 Press AMP to set the remote control unit to AMP-operation mode. 2 Press CH LVL. Subwoofer OFF 3 Press i to select "Fader", then select the item to be adjusting using o p. When a headphone jack is inserted, the headphone channel level can be adjusted. Channel Level Front L Front R Center Subwoofer Surround L Surround R -1.0dB -1.0dB -1.0dB +0.5dB 0.0dB 0.0dB Fader Front Rear 4 Use o p to adjust the volume of the speakers. (o : front, p: rear) • The fader function does not affect the subwoofer. • The fader can be adjusted until the volume of the speaker is adjusted to the lowest value of -12 dB. Information BD 64