Marantz NR1602 NR1602N_ENG_CD-ROM_v00 - Page 108
Other settings, Remote control settings
View all Marantz NR1602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Basic version Advanced version Other settings Remote control settings • When you connect a remote control receiver unit (purchased separately) to the REMOTE CONTROL IN connector of this unit, use the following procedure to disable the remote sensor function of this unit. • The remote sensor function of remote control signals is enabled by default. ON/STANDBY PURE DIRECT SURROUND MODE nnDisabling the sensor function of the remote control unit When the main unit is in standby mode, press ON/STANDBY while holding down SURROUND MODE and PURE DIRECT on the main unit. "Remote Lock:ON" is shown on the display, and the infrared light receiving function is disabled. nnEnabling the remote sensor function When the main unit is in standby mode, press ON/STANDBY while holding down SURROUND MODE and PURE DIRECT on the main unit. The infrared light receiving function on the main unit is enabled. NOTE If a remote control receiver unit (purchased separately) is not connected, do not perform this setting. If you do, you will not be able to operate this unit using the remote control unit. Information BD 105