Maytag MER5552BA Use and Care Guide - Page 20

Window

Get Maytag MER5552BA - 30inch Electric Range PDF manuals and user guides View all Maytag MER5552BA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Oven Door o Do net place excessive weight on or stand on an open oven door. This could cause the range to tip over. break Do not attempt to open or close door or operate oven until door is properly replaced. Never place fingers between hinge and front oven frame. Hinge arms are spnng mounted. If accidentally hit. the hinge will slam shut against oven frame and could injure To remove: 1. When cool, open the oven door to the first stop position (opened about four inches}. 2. Grasp door at each side. Do not use the door handle to lift door. 3. Lift up evenly until door clears hinge arms. To replace: 1. Grasp door at each side. 2. Align slots in the door with the hinge arms on the range. 3. Slide the door down onto the hinge arms until the door is completely seated on the hinges. Push down on the top corners of the door to completely seat door on hinges. Door should not appear crooked. Note: The oven door on a new range may feel "spongy" when it is closed. This is normal and will decrease with use. Oven Window To protect the oven door window: 1. Do not use abrasive cleaning agents such as steel wool scouring pads or powdered cleansers as they may scratch the glass. 2. Do not hit the glass with pots, pans, furniture, toys, or other objects. 3. Do not close the oven door until the oven racks are in place. Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later date. i Disconnect p0wei to range be[0re replacing l!#ht bu"b. when replacing bulb, o Do not touch hot bulb with a damp cloth as this may cause the bulb to break. To Replace Oven Light Bulb: 1. When oven is cool, hold bulb cover in place, then slide wire retainer off cover. NOTE:Bulb cover wiii fall if not held in place while removing wire retainer. BuL_oovER 2. Remove bulb cover and light bulb. 3. Replace with a @-watt appliance bulb. a. Replace bulb cover and se- RETAINER cure with wire retainer. 5. Reconnect power to range. Reset clock. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Oven
Door
o Do net place excessive weight on or stand on an open
oven door. This could cause the range to tip over. break
Do not attempt
to open or close
door or operate
oven until
door
is properly
replaced.
Never
place fingers
between
hinge
and front
oven frame.
Hinge
arms
are
spnng
mounted.
If accidentally
hit. the
hinge
will
slam
shut
against
oven frame
and could
injure
To
remove:
1. When cool, open the oven door to
the first stop position (opened
about four inches}.
2.
Grasp door at each side.
Do not
use the door handle to lift door.
3.
Lift up evenly until door clears
hinge arms.
Oven
Window
To protect
the
oven
door
window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
i
Disconnect p0wei to range be[0re replacing l!#ht bu"b.
when replacing bulb,
To replace:
1. Grasp door at each side.
2. Align slots in the door with the hinge arms on the range.
3. Slide the door down onto the hinge arms until the door is
completely seated on the hinges. Push down on the top
corners of the door to completely seat door on hinges.
Door should not appear crooked.
Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and will decrease with use.
o Do not touch hot bulb with a damp cloth as this may cause
the bulb to break.
To
Replace
Oven
Light
Bulb:
1. When oven is cool, hold bulb cover in place, then slide wire
retainer off cover. NOTE:Bulb cover wiii fall if not held in place
while removing wire retainer.
BuL_oovER
2. Remove bulb cover and light
bulb.
3. Replace with a @-watt ap-
pliance bulb.
a. Replace bulb cover and se-
cure with wire retainer.
RETAINER
5. Reconnect
power
to range.
Reset clock.
19