Maytag MER5552BA Use and Care Guide - Page 9

Oven Control

Page 9 highlights

SeJf-Clean Oven Control (select models) A B C D ........... Less- Thqqer G H 1 J The control panel is designed for ease in programming. The displaywindow on the control shows time of day, timer and oven functions. Control panel shown includes model specific features. (Styling may vary depending on modeL} A Broil B Bake C More+ or LessD Timer Cook & Hold Clean G! Delay Clock !!4 Keep Warm CANCEL Use for broiling and top browning. Use for baking and roasting. Enters or changes time, oven temperature. Sets HJor LO broil Sets Timer. Bakes for a preset time, then holds food warm for 1 hour. Use to set self-clean cycle. Programs the oven to start baking at a later time. Use to set time-of=day clock. Use to keep cooked food warm in oven. Cancels all operations except Timer and Clock. Using the Touchpads Press the desired pad. Press the More+ or Less- pad to enter time or temperature. , A beep will sound when any pad is touched. , A douMe beep will sound if a programming error occurs. Note: Four seconds after pressing the More+ or Lesspad, the time or temperature will automatically be entered. If more than 30 seconds elapse between touching a function pad and the More+ or Less- pad, the function will be canceled and the display will return to the previous display. The clock can be set to display time in a 12-hour or 2a-hour format. The clock is set at the factory for the 12-hour format. To change the clock to 24-hour format: 1. Press and hold the CANCEL and Delay pads for three seconds. 2. Press the More+ or Less = pad to select 12 or 24 hour. 3. Set the time of day following the directions below. To set the Clock: 1. Press the Clock pad. , Time of day and the colon flash in the display. 2. Press the More+ or Less- pad to set the time of day. , Colon continues flashing. 3. Press the Clock pad again or wait four seconds. Less- When electrical power is supplied or after a power interruption, the last clock time before power was interrupted wiii flash. To recall the time of day when another time function is showing, press the Clock pad. Clock time cannot be changed when the oven has been programmed for cook or clean Delay or Cook & Hold. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

SeJf-Clean
Oven Control
(select models)
A
B
C
D
...........
Thqqer
;
Less-
..................
G
H
1
J
The control panel is designed for ease in programming. The displaywindow on the control shows time of day, timer and oven functions.
Control panel shown includes model specific features. (Styling may vary depending on modeL}
A
B
C
D
G!
!!4
Broil
Bake
More+ or
Less-
Timer
Cook & Hold
Clean
Delay
Clock
Keep Warm
CANCEL
Use for broiling and top browning.
Use for baking and roasting.
Enters or changes time, oven
temperature.
Sets HJor LO broil
Sets Timer.
Bakes for a preset time, then holds food
warm for 1 hour.
Use to set self-clean cycle.
Programs the oven to start baking at
a later time.
Use to set time-of=day clock.
Use to keep cooked food warm in oven.
Cancels all operations except Timer
and Clock.
Using
the
Touchpads
Press the desired pad.
Pressthe More+ or Less- pad to enter time or temperature.
,
A beep will sound when any pad is touched.
,
A douMe beep will sound if a programming
error occurs.
Note:
Four seconds after pressing the More+ or Less-
pad, the time or temperature will automatically be entered.
If more than 30 seconds elapse between touching a
function pad and the More+ or Less- pad, the function will
be canceled and the display will return to the previous
display.
The clock can be set to display time in a 12-hour or 2a-hour
format. The clock is set at the factory for the 12-hour format.
To
change
the
clock
to
24-hour
format:
1. Press and hold the CANCEL and Delay
pads for three seconds.
2.
Press the More+ or Less = pad to select
12 or 24 hour.
3.
Set the time
of day following
the
directions
below.
To
set
the
Clock:
1. Pressthe Clock pad.
, Time of day and the colon flash in the
display.
2.
Pressthe More+ or Less- pad to set the
time of day.
,
Colon continues flashing.
3.
Pressthe Clock pad again or wait four
seconds.
%
...............................
_
Less-
When electrical power is supplied or after a power
interruption, the last clock time before power was
interrupted wiii flash.
To recall the time of day when another time function is
showing, press the Clock pad.
Clock time cannot be changed when the oven has been
programmed for cook or clean Delay or Cook & Hold.
8