NEC NP-PA622U User's Manual - Page 121

WIRED LAN 5. Using On-Screen Menu PROFILES DHCP IP ADDRESS SUBNET MASK GATEWAY AUTO DNS DNS CONFIGURATION RECONNECT • The settings for using the built-in Ethernet/HDBaseT port in - the projector can be recorded in the projector memory in two ways. • Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options. After doing this, select [OK] and press the ENTER button. This will store your settings in memory. • To recall the settings from memory: After selecting [PROFILE 1] or [PROFILE 2] from the [PROFILES] list. Select [OK] and press the ENTER button. • Select [DISABLE] when not connecting to a wired LAN Place a check mark to automatically assign an IP address to the - projector from your DHCP server. Clear this check box to register the IP address or subnet mask number obtained from your network administrator. Set your IP address of the network connected to the projector Up to 12 numeric when [DHCP] is turned off. characters Set your subnet mask number of the network connected to the Up to 12 numeric projector when [DHCP] is turned off. characters Set the default gateway of the network connected to the projector Up to 12 numeric when [DHCP] is turned off. characters Place a check mark to automatically assign the IP address of your DNS server connected to the projector from your DHCP server. Clear this check box to set the IP address of your DNS server connected to the projector. Up to 12 numeric characters Set the IP address of your DNS server on the network connected Up to 12 numeric to the projector when [AUTO DNS] is cleared. characters Retry to connect the projector to a network. Try this if you have - changed [PROFILES]. 108