NEC NP-PA622U User's Manual - Page 138
(2) Making Connections, Analog RGB signal connection, Installation and Connections
![]() |
View all NEC NP-PA622U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
6. Installation and Connections ❷ Making Connections A computer cable, BNC cable (5-core type), HDMI cable, or a DisplayPort cable can be used to connect to a computer. The connection cable is not enclosed with the projector. Please get ready a suitable cable for the connection. Analog RGB signal connection • Connect the computer cable to the display output terminal (mini D-sub 15 pin) on the computer and the computer video input terminal on the projector. Please use a computer cable attached with a ferrite core. • When connecting the display output terminal (mini D-sub 15 pin) on the computer to the BNC video input terminal, use a conversion cable to convert the BNC cable (5 core) to a mini D-sub 15 pin cable. COMPUTER IN AUDIO IN BNC IN AUDIO IN RGB - to - BNC cable (not supplied) Stereo mini-plug audio cable (not supplied) Stereo mini-plug audio cable (not supplied) Computer cable (sold commercially) NOTE: Please check the operating manual of the computer as the name, position and direction of the terminal may differ depending on the computer. • Select the source name for its appropriate input connector after turning on the projector. Input connector COMPUTER IN BNC IN INPUT button on the projector cabinet 7:COMPUTER 4:BNC Button on the remote control 7/COMPUTER 4/BNC 125
![](/manual_guide/products/nec-nppa622u-users-manual-4e37195/138.png)