NEC NP-PA622U User's Manual - Page 69
(3) Displaying a Picture Using [EDGE BLENDING], Before explaining use of the Edge Blending function
View all NEC NP-PA622U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
4. Multi-Screen Projection ❸ Displaying a Picture Using [EDGE BLENDING] A high resolution video can be projected on an even bigger screen by combining multiple projectors on the left, right, top and bottom. This projector is equipped with an "EDGE BLENDING Function" that makes the edges (boundaries) of the projection screen indistinguishable. NOTE: • For projector throw distances, refer to "Throw distance and screen size" on page 158. • Before performing the Edge Blending function, place the projector in the correct position so that the image becomes square in the appropriate size, and then make optical adjustments (lens shift, focus, and zoom). • Adjust the brightness of each projector using [LAMP ADJUST] under [LAMP MODE]. In addition, use [REF. WHITE BALANCE] to adjust the [CONTRAST], [BRIGHTNESS] and [UNIFORMITY]. Before explaining use of the Edge Blending function This section explains the case for "Example: Placing two projectors side by side". As shown, the projected image on the left is referred to as "Projector A" and the projected image on the right is referred to "Projector B". Unless otherwise specified hereinafter, the "projector" is used to mean both A and B. Example: Placing two projectors side by side Projected area Edge Blending area Projected area Projector A Projector B 56