NEC NP-PA622U User's Manual - Page 29
(4) Selecting a Source, Selecting the computer or video source, Using the Remote Control
![]() |
View all NEC NP-PA622U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
2. Projecting an Image (Basic Operation) ❹ Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the INPUT button for 1 second or longer. The projector will search for the available input source and display it. The input source will change as follows: HDMI1 → HDMI2 → DisplayPort → BNC → BNC(CV) → BNC(Y/C) → COMUPTER → HDBaseT → HDMI1 Press it briefly to display the [INPUT] screen. Press the ▼/▲ buttons to match the target input terminal and then press the ENTER button to switch the input. To delete the menu display in the [INPUT] screen, press the MENU or EXIT button. TIP: If no input signal is present, the input will be skipped. Using the Remote Control Press any one of the 1/HDMI 1, 2/HDMI 2, 3/DisplayPort, 4/BNC, 5/ BNC(CV), 6/BNC(Y/C), 7/Computer, or 8/HDBaseT buttons. 16
![](/manual_guide/products/nec-nppa622u-users-manual-4e37195/29.png)