NEC NP-PA622U User's Manual - Page 32
Adjusting the vertical position of a projected image (Lens shift), Projecting an Image Basic Operation
![]() |
View all NEC NP-PA622U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
2. Projecting an Image (Basic Operation) Adjusting the vertical position of a projected image (Lens shift) CAUTION Perform the adjustment from behind or from the side of the projector. Adjusting from the front could expose your eyes to strong light which could injure them. Lens shift dial (Horizontal) Leftward Rightward Downward Upward Lens shift dial (Vertical) • Turn the lens shift dials clockwise or counterclockwise. Vertical dial Turn this clockwise or counterclockwise to adjust the projection position in the vertical direction. Approximate turning range: About 6 turns counterclockwise, about 2 turns clockwise when the lens is at the center position. Horizontal dial Turn this clockwise or counterclockwise to adjust the projection position in the horizontal direction. Approximate turning range: About 1 turn counterclockwise, about 1 turn clockwise when the lens is at the center position. NOTE: • The dials can be turned more than one full turn, but the projection position cannot be moved more than the range indicated on the following page. • If the lens is shifted to the maximum in the diagonal direction, the edges of the screen will be dark or shaded. • The vertical shift adjustment must be finished with an image shifted upward. If you finish the vertical shift adjustment with an image shifted down, the zoom/focus adjustments or strong shaking may cause a projected image to slightly shift down. • The lens shift function cannot be used when using the separately sold NP11FL lens. 19
![](/manual_guide/products/nec-nppa622u-users-manual-4e37195/32.png)