NEC NP-PA622U User's Manual - Page 35
Applicable lens: NP11FL, Preparations
![]() |
View all NEC NP-PA622U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2. Projecting an Image (Basic Operation) Applicable lens: NP11FL With the NP11FL lens, adjust the focus and picture distortion. Preparations: Turn the lens shift dials (vertical and horizontal) on the projector to return the lens shift to the center. Approximate lens center position (explained here for the desktop front projection mode) Horizontal dial First turn the dial to the left edge, then turn it further so that the knob is horizontal. From this position, turn the dial 1 full turn clockwise. Vertical dial First turn the dial to the bottom edge, then turn it further so that the knob is horizontal. From this position, turn the dial 2 full turns counterclockwise. 1. Turn the distortion ring to the left edge. Lens shift dials Distortion ring 2. Turn the focus lever clockwise and counterclockwise to adjust the focus at the center of the screen. Focus lever 3. Use the distortion ring to correct the screen's distortion. (This also brings the edges of the screen into focus.) 4. Use the focus lever to adjust the screen's overall focus. * If the focus at the center of the screen is off, turn the distortion ring a little counterclockwise. The focus at the center of the screen can now be adjusted with the focus lever. 22
![](/manual_guide/products/nec-nppa622u-users-manual-4e37195/35.png)