NEC NP-PA622U User's Manual - Page 139
Digital RGB signal connection, DisplayPort
![]() |
View all NEC NP-PA622U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
6. Installation and Connections Digital RGB signal connection • Connect a commercially available HDMI cable between the computer's HDMI output connector and the projector's HDMI1 or HDMI2 input connector. • Connect a commercially available DisplayPort cable between the computer's DisplayPort output connector and the projector's DisplayPort input connector. HDMI 2 IN HDMI 1 IN DisplayPort IN HDMI cable (not supplied) DisplayPort cable (not supplied) • Select the source name for its appropriate input connector after turning on the projector. Input connector HDMI 1 IN HDMI 2 IN DisplayPort IN INPUT button on the projector cabinet 1:HDMI 1 2:HDMI 2 3:DisplayPort Button on the remote control 1/HDMI 1 2/HDMI 2 3/DisplayPort 126
![](/manual_guide/products/nec-nppa622u-users-manual-4e37195/139.png)
126
6. Installation and Connections
Digital RGB signal connection
•
Connect a commercially available HDMI cable between the computer’s HDMI output connector and the projector’s
HDMI1 or HDMI2 input connector.
•
Connect a commercially available DisplayPort cable between the computer’s DisplayPort output connector and
the projector’s DisplayPort input connector.
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
INPUT button on the projector
cabinet
Button on the remote control
HDMI 1 IN
1:HDMI 1
1/HDMI 1
HDMI 2 IN
2:HDMI 2
2/HDMI 2
DisplayPort IN
3:DisplayPort
3/DisplayPort
DisplayPort IN
HDMI 1 IN
HDMI 2 IN
HDMI cable (not supplied)
DisplayPort cable (not supplied)