NEC NP-PA622U User's Manual - Page 66
Projecting two screens, PIP/PICTURE BY PIC
View all NEC NP-PA622U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
4. Multi-Screen Projection Projecting two screens 1. Press the MENU button to display the on-screen menu and select [DISPLAY] → [PIP/PICTURE BY PIC- TURE]. This displays the [PIP/PICTURE BY PICTURE] screen in the on-screen menu. 2. Select [SUB INPUT] using the ▼/▲ buttons, and press the ENTER button. This displays the [SUB INPUT] screen. 3. Select the input signal using the ▼/▲ buttons, and press the ENTER button. The [PIP] (PICTURE IN PICTURE) or [PICTURE BY PICTURE] screen set up under [MODE] is projected. (→ page 85) • When the signal name is displayed in grey, this means that it cannot be selected. • The signal can also be selected by pressing the PIP button or PBP/POP button on the remote control. 4. Press the MENU button. The on-screen menu will disappear. 5. When returning to single screen, display the [PIP/PICTURE BY PICTUE] screen one more time and select [OFF] in the [SUB INPUT] screen of the Step 3. TIP: • During dual-screen projection, if the selected input is not supported by the sub-screen, the sub-screen will appear as a black screen. 53