NEC NP-PA622U User's Manual - Page 148
Reference drawings, Lens shift securing method
View all NEC NP-PA622U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
6. Installation and Connections Reference drawings * The drawing showing the dimensional requirements is not an actual stand design drawing. [Side View] 200 [Front View] [Bottom View] Screw holes for 4 M4 use 310 or greater Filter cover Rear foot Tilt foot (remove) 130 or greater Filter cover (when opened) Horizontal adjuster Lens shift securing method 1. Pull the securing lever cover towards you to remove it. • The cover cannot be detached from the projector. 2. Turn the screws to the left to loosen them. • Screws cannot be removed. 135
135
6. Installation and Connections
Reference drawings
* The drawing showing the dimensional requirements is not an actual stand design drawing.
[Side View]
[Front View]
Screw holes for 4 -
M4 use
Tilt foot (remove)
130 or greater
200
Filter cover (when opened)
Horizontal adjuster
[Bottom View]
Filter cover
310 or greater
Rear foot
Lens shift securing method
1. Pull the securing lever cover towards you to remove it.
•
The cover cannot be detached from the projector.
2. Turn the screws to the left to loosen them.
•
Screws cannot be removed.