NEC NP-PA622U User's Manual - Page 89
Adjusting Brightness and Contrast [DYNAMIC CONTRAST], Adjusting White Balance [WHITE BALANCE]
![]() |
View all NEC NP-PA622U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Adjusting Color Temperature [COLOR TEMPERATURE] This option allows you to select the color temperature of your choice. A value between 5000 K and 10500 K can be set in 100 K units. 5. Using On-Screen Menu NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available. Adjusting Brightness and Contrast [DYNAMIC CONTRAST] When set, the most optimal contrast ratio is adjusted according to the video. OFF Dynamic contrast is disabled. MOTION IMAGE Most optimal settings for moving images. STILL IMAGE Most optimal settings for static images. Rapidly follows any changes in the video. NOTE: • Depending on the conditions, projector settings such as [DYNAMIC CONTRAST] may not be able to be selected. Adjusting White Balance [WHITE BALANCE] This allows you to adjust the white balance. Contrast for each color (RGB) to adjust the white level of the screen; Brightness for each color (RGB) is used to adjust the black level of the screen. [COLOR CORRECTION] Corrects the color for all signals. Adjusts the tone for the colors red, green, blue, yellow, magenta and cyan. RED GREEN BLUE YELLOW MAGENTA CYAN HUE SATURATION HUE SATURATION HUE SATURATION HUE SATURATION HUE SATURATION HUE SATURATION + Direction − Direction + Direction − Direction + Direction − Direction + Direction − Direction + Direction − Direction + Direction − Direction + Direction − Direction + Direction − Direction + Direction − Direction + Direction − Direction + Direction − Direction + Direction − Direction Magenta direction Yellow direction Vivid Weak Yellow direction Cyan direction Vivid Weak Cyan direction Magenta direction Vivid Weak Red direction Green direction Vivid Weak Blue direction Red direction Vivid Weak Green direction Blue direction Vivid Weak [CONTRAST] Adjusts the intensity of the image according to the incoming signal. [BRIGHTNESS] Adjusts the brightness level or the back raster intensity. [SHARPNESS] Controls the detail of the image. 76
![](/manual_guide/products/nec-nppa622u-users-manual-4e37195/89.png)