NEC NP-PX800X User Manual - Page 132

5. Using On-Screen Menu Using the Reference Lens Memory Function [REF. LENS MEMORY] This function serves to store the adjusted values common to all input sources when using the LENS SHIFT, ZOOM and FOCUS buttons of the projector or the remote control. The adjusted values stored in memory can be used as a reference to the current. STORE Stores the current adjusted values in memory as a reference. MOVE Applies the adjusted reference values stored in [STORE] to the current signal. RESET Returns the adjusted reference values to the factory default setting. LOAD BY SIGNAL �� For change to take effect at the time of source selection, select [YES]. FORCED MUTE To turn off the image during lens shift, select [YES]. CALIBRATION Corrects the adjustable zoom and focus range. The adjustable zoom and focus range can vary depending on the lens in use. Be sure to perform [CALIBRATE] after replacement of the lens. NOTE: This option is only available when [YES] is selected for [MOVE WITH SIGNAL CHANGE]. NOTE: • Adjusted values in [REF.LENS MEMORY] will not be returned to default when performing [CURRENT SIGNAL] or [ALL DATA] for [RESET] from the menu. • To store adjusted values for each input source, use the Lens Memory function. (→ page 45, 109) 118