NEC NP-PX800X User Manual - Page 149

5. Using On-Screen Menu • When selecting [WPS], the network will be connected by using settings stored automatically with the WPS function. Selecting [WPS] will allow the projector to access the network by using the settings the WPS function automatically stored. DHCP Place a check mark to automatically assign an IP address to the - projector from your DHCP server. Clear this check box to register the IP address or subnet mask number obtained from your network administrator. Set your IP address of the network connected to the projector Up to 12 numeric when [DHCP] is turned off. characters Set your subnet mask number of the network connected to the Up to 12 numeric projector when [DHCP] is turned off. characters Set the default gateway of the network connected to the projector Up to 12 numeric when [DHCP] is turned off. characters Set the IP address of your WINS server of the network connected Up to 12 numeric to the projector when [DHCP] is turned off. characters Place a check mark to automatically assign the IP address of your Up to 12 numeric DNS server connected to the projector from your DHCP server. characters Clear this check box to set the IP address of your DNS server connected to the projector. Set the IP address of your DNS server on the network connected Up to 12 numeric to the projector when [AUTO DNS] is cleared. characters This menu allows you to set various items for your wireless LAN - connection (network type, security). Retry to connect the projector to a network. Try this if you have - changed [PROFILES]. IP ADDRESS SUBNET MASK GATEWAY WNS CONFIGURATION AUTO DNS DNS CONFIGURATION ADVANCED* RECONNECT * The [ADVANCED] setting screen is available for [WIRELESS LAN] only. NOTE: • If you select [EASY CONNECTION] from [PROFILES], you cannot make settings to DHCP and its following items except [CHANNEL] in [ADVANCED]. Advanced Settings (settings only required when using a separately sold wireless LAN unit) (ADVANCED menu only) 135