NEC NP-PX800X User Manual - Page 66

3. Convenient Features NETWORK SETTINGS • SETTINGS WIRED or WIRELESS SETTING APPLY DHCP ON DHCP OFF IP ADDRESS SUBNET MASK GATEWAY WINS AUTO DNS ON AUTO DNS OFF Setting for WIRED LAN PROFILE 1/PROFILE 2 DISABLE Two settings can be set for wired LAN connection. Select PROFILE 1 or PROFILE 2. Turn off wired LAN connection Set for wired LAN or for wireless LAN. Apply your settings to wired LAN or wireless LAN. Automatically assign IP address, subnet mask, and gateway to the projector from your DHCP server. Set IP address, subnet mask, and gateway to the projector assigned by your network administrator. Set your IP address of the network connected to the projector. Set your subnet mask number of the network connected to the projector. Set the default gateway of the network connected to the projector. Set the IP address of your WINS server of the network connected to the projector when [DHCP] is turned on, this option is not available. DHCP server will automatically assign IP address of DNS server connected to the projector. Set your IP address of DNS server connected to the projector. Setting for WIRELESS LAN (the optional Wireless LAN Unit required for Europe, Australia, and Asian countries) EASY CONNECTION SIMPLE ACCES POINT WPS Execute a wireless LAN using EASY CONNECTION. Set the projector for simple access point. Use WPS (Wi-Fi Protected Setup™) to set up the wireless LAN for the projector. NOTE: Use the projector's menus to make WPS connections and change the WPS profile settings. Select a channel. Available channels vary depending on the country and region. When you select [INFRASTRUCTURE], make sure that the projector and your access point are on the same channel; when you select [AD HOC], make sure that the projector and your computer are on the same channel. Two settings can be set for wireless LAN connection. Select PROFILE 1 or PROFILE 2. CHANNEL PROFILE 1/PROFILE 2 52