NEC PX-42M3A PlasmaSync 4200W - Page 28

Screen Settings Menu Adjusting the position and size of the wide screen The position and size of the wide screen can be fine-adjusted. Example: Adjusting the vertical position in the zoom mode Press the MENU button on the remote controller to display the MAIN MENU on the screen, then... 1. Use the v and w buttons to select "SCREEN", then press the "OK" button. The "SCREEN" screen appears. 2. Use the v and w buttons to select "WIDE ADJ.", then press the "OK" button. SCREEN WIDE ADJ. RGB ADJ. OSM ADJ. RETURN SEL. O K OK MENU EXIT The "WIDE ADJ." screen appears. 3. To adjust the zoom mode ... Use the ᮤ and ᮣ buttons to select "ZOOM". The mode switches as follows when the ᮤ and ᮣ buttons are pressed: → ZOOM ↔ NORMAL ↔ FULL ↔ STADIUM ← * If neither the ᮤ or ᮣ button is pressed within 5 sec- V-POSITION onds, the current adjustment is set and the previous screen reappears. To continue making other wide screen adjustments ... Repeat from step 4. 6. Press the "OK" button. The wide screen's vertical position has now been adjusted. 7. Once the adjustment is completed ... WIDE ADJ. MODE : V-POSITION : V-HEIGHT : RETURN ZOOM 0 SEL. ADJ. MENU EXIT Press the "MENU" button. All menus disappear. WIDE ADJ. MODE : V-POSITION : V-HEIGHT : RETURN ZOOM 0 SEL. ADJ. MENU EXIT *The mode can also be switched by pressing the "WIDE/ AUTO WIDE" button on the remote controller. Information Ⅵ Adjusting the wide screen V-POSITION ....... Adjusts the vertical position of the picture. V-HEIGHT .......... Adjusts the vertical size of the pic- ture. Ⅵ Restoring the factory default settings Select "RESET" under the function menu. Note that this also restores other settings to the factory defaults. 4. To adjust the vertical position ... Use the v and w buttons to select "V-POSITION". 5. Adjust using the ᮤ and ᮣ buttons. WIDE ADJ. MODE : ZOOM V-POSITION : V-HEIGHT : 0 RETURN SEL. ADJ. MENU EXIT 23