Netgear DGN2200 DGN2200 User Manual - Page 16
Using the Setup Wizard - user manual
UPC - 606449067279
View all Netgear DGN2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Wireless-N 300 Modem Router DGN2200 User Manual Using the Setup Wizard You can manually configure your Internet connection using the Basic Settings screen, or you can allow the Setup Wizard to detect your Internet connection. The Setup Wizard searches your Internet connection for servers and protocols to determine your ISP configuration. This feature is not the same as the Smart Wizard on the Resource CD that is used for installation. To use the Setup Wizard: 1. To go to the Setup Wizard screen, from the top of the main menu, select Setup Wizard. Figure 1-4 2. Select Yes for the Auto-Detect Connection Type, and then click Next to proceed. Enter your ISP settings, as needed.The Setup Wizard detects your ISP configuration. Depending on the type of connection, you are prompted to enter your ISP settings, as shown in the following table. Table 1-1. Auto-Detected Internet Connection Types Connection Type PPP over Ethernet (PPPoE) PPP over ATM (PPPoA) Dynamic IP Account Setup ISP Information Enter the login user name and password. These fields are casesensitive. No entries needed. 1-4 Configuring Your Internet Connection v1.0, March 2010