Netgear GS418TPP Hardware Installation Guide - Page 11
LEDs
View all Netgear GS418TPP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ProSAFE 16-Port Gigabit Smart Managed Switch with PoE+ and 2 SFP Ports LEDs This section describes the LED designations of the switch. Table 1. LEDs on switch LED Power LED Description • Solid green . The device is powered on. • Solid amber. The device is booting. • Off. Power is not supplied to the device. Fan LED • Solid amber. The fans has failed. • Off. The fan is operating normally. RJ-45 SPD Mode LED Left LEDs. (Link, Speed, Activity) for copper ports 1 to 16 • Off: No link is established. • Solid green: A valid 1000 Mbps link is established. • Blinking green. The port is transmitting or receiving packets at 1000 Mbps. • Solid amber. A valid 10/100 Mbps link is established. • Blinking amber.The port is transmitting or receiving packets at 10/100 Mbps. Right LED • Off: PoE mode is off. • Solid green: PoE mode is on. • Solid amber: A PoE fault occurred. Hardware Overview 11