Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 145

GS716Tv2 and GS724Tv3 Software Administration Manual Table 5-13. Certificate Download Fields Field Description File Type TFTP Server IP Select the type of SSL certificate to download, which can be one of the following: • SSL Trusted Root Certificate PEM File: SSL Trusted Root Certificate File (PEM Encoded). • SSL Server Certificate PEM File: SSL Server Certificate File (PEM Encoded). • SSL DH Weak Encryption Parameter PEM File: SSL Diffie-Hellman Weak Encryption Parameter File (PEM Encoded). • SSL DH Strong Encryption Parameter PEM File: SSL Diffie- Hellman Strong Encryption Parameter File (PEM Encoded). Enter the IP address of the TFTP server in the form of an IP address in x.x.x.x format. The factory default is 0.0.0.0. Make sure that the software image or other file to be downloaded is available on the TFTP server. Remote File Name Enter the name of the file to download. You may enter up to 32 characters. The factory default is blank. 2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 3. If you change any of the settings on the page, click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. Access Profile Configuration Use the Access Profile Configuration page to configure settings that control management access to the switch. To access the Access Profile Configuration page: Managing Device Security v1.0, July 2009 5-19