Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 171

GS716Tv2 and GS724Tv3 Software Administration Manual Table 5-32. MAC ACL Rule Configuration Fields Field Description ACL ID Direction Select an existing MAC ACL. Specifies the packet filtering direction for ACL. The only valid direction is Inbound, which means the MAC ACL rules are applied to traffic entering the port. Sequence Number An optional sequence number may be specified to indicate the order of this access list relative to other access lists already assigned to this interface and direction. A low number indicates high precedence order. If a sequence number is already in use for this interface and direction, the specified access list replaces the currently attached access list using that sequence number. If the sequence number is not specified by the user, a sequence number that is one greater than the highest sequence number currently in use for this interface and direction will be used. Valid range is 1-4294967295. Port Selection Table Specifies list of all available valid interfaces for ACL binding. All nonrouting physical interfaces and interfaces participating in LAGs are listed. 2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 3. Click Apply to save any changes to the running configuration. MAC Binding Table Use the MAC Binding Table page to view or delete the MAC ACL bindings. To display the MAC Binding Table: Managing Device Security v1.0, July 2009 5-45