Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 213

GS716Tv2 and GS724Tv3 Software Administration Manual Table 7-2. Download File to Switch Fields Field File Type Image Name Server Address Type TFTP Server IP Transfer File Path Remote File Name Start File Transfer Description Specify what type of file you want to download to the switch: • Code: The code is the system software image, which is saved in one of two flash sectors called images (image1 and image2). The active image stores the active copy; while the other image stores a second copy. The device boots and runs from the active image. If the active image is corrupt, the system automatically boots from the non-active image. This is a safety feature for faults occurring during the boot upgrade process. • Text Configuration: A text-based configuration file enables you to edit a configured text file (startup-config) offline as needed without having to translate the contents for Smart Switch to understand. The most common usage of text-based configuration is to upload a working configuration from a device, edit it offline to personalize it for another similar device (for example, change the device name, serial number, IP address), and download it to that device. • SSL Trusted Root Certificate PEM File: SSL Trusted Root Certificate File (PEM Encoded). • SSL Server Certificate PEM File: SSL Server Certificate File (PEM Encoded). • SSL DH Weak Encryption Parameter PEM File: SSL Diffie-Hellman Weak Encryption Parameter File (PEM Encoded). • SSL DH Strong Encryption Parameter PEM File: SSL Diffie-Hellman Strong Encryption Parameter File (PEM Encoded). Specify the code image you want to download, either image1 or image2. This field is only visible when Code is selected as the File Type. The factory default is image1. Shows the format of the TFTP Server Address field The factory default is IPv4. Enter the IP address of the TFTP server in accordance with the format indicated by the TFTP Server Address Type. The factory default is the IPv4 address 0.0.0.0. Enter the path on the TFTP server where the selected file is located. You may enter up to 32 characters. The factory default is blank. Enter the name of the file you want to download from the TFTP server. You may enter up to 32 characters. A file name with a space is not accepted. The factory default is blank. To initiate the download, check this box before clicking Submit. 2. Click Cancel to cancel the operation on the screen and reset the data on the screen to the latest value of the switch. Maintenance 7-7 v1.0, July 2009