Netgear R9000 User Manual - Page 155
Factory Settings, Table 3. Factory default settings, Supplemental Information
View all Netgear R9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Nighthawk X10 AD7200 Smart WiFi Router Factory Settings You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the router for at least seven seconds. The router resets and returns to the factory configuration settings shown in the following table. Table 3. Factory default settings Feature Default setting Router login User login URL www.routerlogin.com or www.routerlogin.net User name (case-sensitive) admin Login password (case-sensitive) password Internet connection WAN MAC address WAN MTU size Use default hardware address 1500 Port speed AutoSensing Local network (LAN) LAN IP Subnet mask 192.168.1.1 255.255.255.0 DHCP server Enabled DHCP range 192.168.1.2 to 192.168.1.254 Time zone Pacific time DHCP starting IP address 192.168.1.2 DHCP ending IP address 192.168.1.254 DMZ Disabled Time adjusted for daylight saving Disabled time Firewall SNMP Disabled Inbound (communications coming Disabled (except traffic on port 80, the HTTP port) in from the Internet) Outbound (communications going Enabled (all) out to the Internet) Source MAC filtering Disabled Supplemental Information 155