Netgear RM356 RM356 Reference Manual - Page 103
Troubleshooting, Basic Functioning, LEDS, LAN Link LED
![]() |
UPC - 606449002263
View all Netgear RM356 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Chapter 10 Troubleshooting This chapter gives information about troubleshooting your Model RM356 Modem Router. After each problem description, instructions are provided to help you diagnose and solve the problem. Basic Functioning When you turn on power to the router, the PWR LED lights. If the PWR LED does not light, refer to the next section, "LEDS." After the PWR LED lights, the router performs a self-test for 15 seconds. After this self-test, the Test LED should begin to blink at a rate of about 0.5 Hz. After initialization is complete, the Test LED will turn off. If an Ethernet connection is made to any LAN port, the LAN LED for that port number should be on. If the LAN LED is off, refer to "LAN Link LED," on page 10-1. LEDS If all LEDs are off when your router is turned on, make sure that the power cord is properly connected to your router and that the power supply adapter is properly connected to a functioning power outlet. If the error persists, you have a hardware problem and should contact technical support. LAN Link LED If the LAN LED for any LAN port does not light when the Ethernet connection is made to that port, check the following: • Physical Ethernet cables Make sure that the connections are secure at the router and at the attached workstation. Troubleshooting 10-1
![](/manual_guide/products/netgear-rm356-rm356-reference-manual-016eb71/103.png)