Netgear RM356 RM356 Reference Manual - Page 43
Router Configuration, Configuration Methods
![]() |
UPC - 606449002263
View all Netgear RM356 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 3 Router Configuration This chapter contains information about configuring your Model RM356 Modem Router through the built-in Manager interface. Configuration Methods If you are using a PC, you have the following two options to configure your router: • Through FirstGear FirstGear is an easy-to-use Windows-based utility that leads you through a Quick Setup or an Advanced menu for configuring your router. For FirstGear instructions, refer to Getting Started Using FirstGear for the Model RM356 Modem Router. • Through the built-in Manager interface If you are using a Macintosh or UNIX-based workstation, the built-in Manager interface is the only way that you can configure your router through your computer. However, you can use a PC to configure the router and then connect the router to the Macintosh or workstation after the configuration process is complete. The built-in Manager interface is accessible through either a serial or a Telnet connection (refer to "Connecting Through the Serial Port" or "Connecting Through a Telnet Connection" on page 2-9 of Chapter 2, "Router Installation and Connection"). If the router has not previously been assigned an IP address, you cannot connect through a Telnet session. You must use a serial connection. Router Configuration 3-1
![](/manual_guide/products/netgear-rm356-rm356-reference-manual-016eb71/43.png)