Netgear RM356 RM356 Reference Manual - Page 51
Ethernet Menu, General Setup Menu
![]() |
UPC - 606449002263
View all Netgear RM356 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Ethernet Menu Reference Guide for the Model RM356 Modem Router Menu 3 is for configuring the Ethernet LAN parameters, including interface type, filters, DHCP, and IP address information. From the Main Menu, enter 3 to display Menu 3 - Ethernet Setup. There are two submenus: Menu 3.1 - General Setup and Menu 3.2 - TCP/IP and DHCP Setup. Refer to the following sections for descriptions of these submenus. Refer to Table 3-1 on page 3-3 for information about navigating through the menus. General Setup Menu The General Setup Menu allows the application of filter sets for filtering your Ethernet traffic. Filter sets are used to block certain packets in order to reduce bandwidth or to enhance security. Refer to Chapter 8, "Filter Configuration," for more information about configuring filters. Filters that have been defined in Menu 21 may be applied here by entering their numbers in the appropriate fields in this menu. Up to four filter sets may be cascaded by listing the filter set numbers separated by commas. Table 3-5 lists and describes the filter sets in the Ethernet General Setup menu. Table 3-5. Ethernet General Setup Menu Filter Sets Field Input and Output Filter Sets Description Enter the filter set number(s) to apply a filter to packets received from the LAN (Input) or sent to the LAN (Output). Router Configuration 3-9
![](/manual_guide/products/netgear-rm356-rm356-reference-manual-016eb71/51.png)