Netgear RM356 RM356 Reference Manual - Page 99
Back Up Configuration, Restore Configuration, Software Update
UPC - 606449002263
View all Netgear RM356 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Back Up Configuration Reference Guide for the Model RM356 Modem Router Select option 5 from Menu 24 - Maintenance to back up the current configuration settings of your router onto a disk. NETGEAR highly recommends backing up your router configuration after it is functioning. The procedure for downloading varies depending on the type of terminal software used to access the router. Your terminal software must have the ability to transfer data using the XMODEM Protocol to perform the backup. A backup is possible only through the serial cable connection. Restore Configuration Select option 6 from Menu 24 - Maintenance to reload a previously backed up configuration from a disk to the router. The configuration is stored in the internal flash ROM of your router and is retained even if a power failure occurs. The procedure for uploading varies depending on the type of terminal software used to access the router. Your terminal software must have the ability to transfer data using the XMODEM Protocol to perform the upload. Restoring a configuration is possible only through the serial cable connection. Software Update Software updates are possible only through the serial cable connection. You cannot use the Telnet Protocol to update the software version of your router. Your serial communications software must have the ability to transfer data using the XMODEM Protocol. Using Menu 24.7 - Software Update, you can update the main router (RAS) software or the configuration (ROM) area. Caution: This procedure deletes the existing software before installing the new software. Do not attempt to use this menu unless you have the new software version. System Maintenance 9-9