Netgear RM356 RM356 Reference Manual - Page 97
Call Testing and TCP/IP Tools, dials the node, performs authentication
UPC - 606449002263
View all Netgear RM356 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Reference Guide for the Model RM356 Modem Router Table 9-5. System Maintenance - Diagnostic Menu Fields (continued) Field System Command Description Reboot System [Enter 21] Command Mode [Enter 22] This option reboots the system, implementing any changes that may have been recently added to your system. This option allows the user to enter the command mode. This mode allows you to diagnose and test your router using a specified set of commands. Call Testing and TCP/IP Tools Two test selections-Manual Call and Internet Setup Test-are available for testing call placement and session connection with remote hosts. Both tests cause a call to be placed to a remote node and display the progress of the connection. Manual Call (command 5) prompts the user to specify the desired remote node by its profile number in Menu 11. Internet Setup Test (command 11) automatically calls the remote node that has been specified as an ISP. Enter 11 to select the Internet Setup Test, or enter 5 to select another remote node. This test checks to see if your Internet access or remote node configuration has been done correctly. The router dials the node, performs authentication, and establishes a connection. If everything is working properly, you receive an appropriate response. If you receive an error message, note the error message and consult your network administrator. Figure 9-2 illustrates an example of a trace display for a successful call when using a TCP/IP protocol connection. Start dialing for node ### Hit any key to continue.### Dialing chan phone(last 9-digit):40101 Call CONNECT speed chan prot LCP up CHAP send response CHAP login to remote OK! IPCP negotiation started IPCP up Figure 9-2. Trace Display for a Successful TCP/IP Protocol Connection System Maintenance 9-7