Netgear WGR614v10 Reference Manual - Page 25
Wireless Settings, Enable Wireless Router Radio, Enable SSID Broadcast, Enable, Setup Access List - not broadcasting
View all Netgear WGR614v10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Wireless-G Router WGR614v10 Reference Manual 6. Select Wireless Settings under Advanced in the main menu of the WGR614v10 router. Figure 1-10 7. Make sure that the Enable Wireless Router Radio, Enable SSID Broadcast, and Enable WMM check boxes are selected. 8. Click Setup Access List. 9. Make sure that the Turn Access Control On check box is not selected. 10. Configure and test your wireless computer for wireless connectivity. Program the wireless adapter of your computer to have the same SSID and channel that you specified in the router, and disable encryption. Check that your computer has a wireless link and can obtain an IP address by DHCP from the router. Once your computer has basic wireless connectivity to the router, you can configure the advanced wireless security functions of the computer and router (for more information about security and these settings, see Chapter 2, "Safeguarding Your Network "). Configuring Basic Connectivity v1.0, February 2010 1-13