Nikon COOLPIX 4200 User Manual - Page 23

First Steps The Button The camera can also be turned on by pressing the button for about two seconds. Your most recent picture will be displayed in the monitor ( 53). The Power-On Lamp The power-on lamp indicates the following: When the power-on lamp is On Blinking Off The camera is On In standby mode Off Auto Power Off (Standby Mode) If no operations are performed for one minute (default setting), the monitor will turn off automatically and the camera will enter standby mode to reduce the drain on the battery. While the camera is in standby mode, the power-on lamp will blink. If no operations are performed for three minutes after the camera enters standby mode, the power will turn off automatically and the power-on lamp will go out. The camera will be reactivated from standby mode when you: • Press the power switch • Press the shutter-release button halfway • Press the button to view the last picture taken • Press the MENU button to display the menu for the current mode • Rotate the mode dial to select a new mode The length of time before the camera enters standby mode can be changed using the Auto off option in the setup menu ( 119). However, when a menu or the setup menu is displayed, the monitor will turn off after three minutes, and when pictures are being shown in a non-stop slide show ( 97) or when the camera is powered by an AC adapter kit, the monitor will turn off after thirty minutes. When connecting the camera to a computer or printer with a USB cable, Auto power off function does not work. 13