Nikon COOLPIX P100  P100 User's Manual - Page 118

Taking a Closer Look: Playback Zoom Rotating the zoom control to g (i) during full-frame playback mode (A32) zooms in on the current picture, enlarging and displaying the center of the picture on the monitor. • The guide at lower right shows which portion is enlarged. The following operations can be performed while pictures are zoomed in. 3.0 To Zoom in Zoom out Use g (i) f (h) Description A Zoom increases each time the zoom control is rotated to g (i), up to about 10×. Zoom also - increases by rotating the command dial to the right. Rotate the zoom control to f (h). When the magnification ratio reaches 1×, the display returns to full-frame playback mode. - Zoom also decreases by rotating the command dial to the left. More on Playback Move the display area Press the multi selector H, I, J or K to move the display area to other areas of the picture. 12 Return to full-frame playback k Press the k button. 32, 101 Crop picture Switch to shooting mode d Press to crop the current picture to contain only the portion visible in the monitor. 126 c Press the c button or the shutter-release button to change back to the last chosen shooting mode. Switching to shooting mode 32 can also be performed by pressing the b (movie-record) button. Pictures Taken Using the Face-Priority Function When zooming in on a picture taken using the face-priority function (A91), the picture will be enlarged with the face detected during shooting at the center of the monitor (except for pictures shot while Continuous (A86) or Auto bracketing (A89) was set). 2.0 • If more than one face was detected, the picture will be enlarged with the face on which focus was acquired at the center of the monitor. Press the multi selector H, I, J, or K to display other faces that were detected. • When the zoom control is further rotated towards the g (i) or f (h) direction, the zoom ratio will change and will become a normal playback zoom display. 106