Nikon COOLPIX P100  P100 User's Manual - Page 33
Turning On and Off the Camera, Lens Error, Standby Mode Auto Power Off
View all Nikon COOLPIX P100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Charging the Battery Turning On and Off the Camera Remove the lens cap before turning on the camera. Press the power switch to turn on the camera. The power-on lamp (green) will light for a moment and the monitor will turn on. Press the power switch again to turn off the camera. When the power is turned off, both the power-on lamp and monitor turn off. • When the camera is off, holding down the c button will turn the camera on in playback mode (A32). First Steps C Lens Error If Lens error. (If the lens cap is attached, turn the camera off, remove the lens cap, and turn the camera on.) is displayed, check that the lens cap has been removed and turn the camera on again. C Standby Mode (Auto Power Off) If no operations are performed, the monitor turns off automatically, the camera enters standby mode and the power-on lamp blinks. If no operations are performed for another three minutes, the camera will turn off automatically. • During shooting or playback, if no operations are performed for about a minute (default setting), the camera enters standby mode. • If the monitor is off in standby mode (when the power-on lamp blinks), perform the following operations to turn on the monitor. - Press the power switch, the shutter-release button or the c button. - Rotate the mode dial. • The time that elapses before the camera enters standby mode can be changed from the Auto off (A165) in the setup menu (A152). 21