Nokia 6260 User Guide - Page 134

Many service providers require you to use an IAP for your default access point. Other service providers allow you to use a WAP access point. Contact your service provider for more information. Start to fill in the settings from the top since, depending on the data connection you select (Data bearer), only certain fields are available. • Connection name - Give a descriptive name for the connection. • Data bearer - The options are GPRS or Data call. Depending on what data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined, or with an asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider. To be able to use a data connection, the network operator or service provider must support this feature, and if necessary, activate it for your SIM card • Access point name (for packet data only) - The access point name is needed to establish a connection to the GPRS network. You obtain the access point name from your network operator or service provider. • Dial-up number (for data call only) - The modem telephone number of the access point. • User name - Write a user name if required by the service provider. The user name may be needed to make a data connection, and is usually provided by the service provider. The user name is often case-sensitive. • Prompt password - If you must key in a new password every time you log onto a server, or if you do not want to save your password to the phone, choose Yes. Copyright © 2004 Nokia. All rights 134