Oki MB480 Network Guide Europe - Page 30
Using
View all Oki MB480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
You should see a sequence similar to the following example: Trying 172.168.20.127 Connected to 172.168.20.127 Escape character is '^]'. EthernetBoard OkiLAN PRINTER". login: root 'root' user needs password to login. password: User 'root' logged in. No. MENU (level.1 1:Status / Information 2:Printer Config 3:Network Config 4:Security Config 5:Maintenance 99:Exit setup Please select (1-99)? 4. Enter the number of the item to be changed. The details window for that item displays. 5. When the configuration is complete, select Exit Setup to save your change. To exit without saving your modification, select Quit. 6. Turn the printer off and on again. NOTE The network card continues to use pre-transmission settings until the printer is turned off and back on again. USING SNMP NOTE Not all utilities, features or protocols are supported by every product. Please check with your User's Guide and support website for latest information. The machine and network card can be managed via a standard SNMP management station. The network card supports SNMPv1, SNMPv3, SNMPv3+v1, MIB-II and Oki Data Private MIB. To enable correct management from an SNMP management station, the Oki Data Private MIB needs to be added to that management station. Please refer to the SNMP manager documentation for more information on adding MIBs to SNMP management stations. NOTE The Oki Data Private MIB file can be found in the MIB folder on the DVD-ROM or support website. Please refer to the readme file for further information. The printer's trap address can be set in five places using TCP/IP and in one place with IPX. Printer trap settings can be made with TELNET and a web browser. Network configuration > 30