Oki MICROLINE 320 TURBO Users Guide - Page 48
Temporary Top of Form Change
View all Oki MICROLINE 320 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Temporary Top of Form Change ! If you turn the platen knob when the printer is turned on, you will cause the Top of Form to mis-align. Always turn the printer off before turning the platen knob! ! The factory default setting for the Top of Form (where the printing should begin) is one inch down from the top of the page. To change the Top of Form (move it lower) for one page only: 1 Press SEL to deselect the printer. 2 Press LF to change the position of the Top of Form. |48 Microline 320/321 Turbo/n
48
Microline 320/321 Turbo/n
|
Temporary Top of Form Change
!
If you turn the platen knob when the printer is turned
on, you will cause the Top of Form to mis-align.
Always turn the printer off before turning the platen
knob!
!
The factory default setting for the Top of Form (where
the printing should begin) is one inch down from the
top of the page.
To change the Top of Form (move it lower)
for one page
only
:
1
Press SEL to deselect the printer.
2
Press LF to change the position of the Top of Form.