Oki MICROLINE 320 TURBO Users Guide - Page 62

Expanded Gap.

Page 62 highlights

11 Reinstall the ribbon cartridge. 32T-19dn.eps 12 Replace the pull-up roller assembly and the access cover, then turn the printer on. 32T-04DN.eps and 32T-02.eps 13 Change the printer's secondary menu (make sure paper is loaded!) to engage the expanded printhead gap: a) Press SEL + TEAR while turning the printer back on. b) Press LF to advance through the menu to the Technical group (last option in menu). c) Press FF/LOAD to advance through the items to Expanded Gap. d) Press TEAR to change the setting for Expanded Gap to Valid. e) Press SHIFT + MENU to exit the menu and save your setting. SEL SEL MENU EXIT SHIFT POWER ALARM LF MDicorwo nFeed GROUP FF/LOAD Micro Up Feed ITEM TEAR PARK MENU SET PRINT QUIET TOF PRINT QUHASLDITY NLQ UTL CHARACTE1R0PITCH SSD 17 12 20 15 PROP |62 Microline 320/321 Turbo/n

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131

62
Microline 320/321 Turbo/n
|
11
Reinstall the ribbon cartridge.
32T-19dn.eps
12
Replace the pull-up roller assembly and the access cover,
then turn the printer on.
32T-04DN.eps and 32T-02.eps
13
Change the printer's secondary menu (make sure paper is
loaded!) to engage the expanded printhead gap:
a)
Press SEL + TEAR while turning the printer back on.
b)
Press LF to advance through the menu to the Technical
group (last option in menu).
c)
Press FF/LOAD to advance through the items to
Expanded Gap.
d)
Press TEAR to change the setting for Expanded Gap to
Valid.
e)
Press SHIFT + MENU to exit the menu and save your
setting.