Oki MICROLINE 320 TURBO Users Guide - Page 52
Automatic Forms Tear-Off
![]() |
View all Oki MICROLINE 320 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Automatic Forms Tear-Off Forms Tear-Off must be set to ON in the menu for Automatic Forms Tear-Off to occur. Automatic Forms Tear-Off automatically moves the paper from the initial printing position (print start position) to the tear-off position, after a time interval which you select through the menu. The top of the page (perforation) is even with the tear bar. The tear bar is located under the clear top of the access cover. Paper remains in the tear-off position until the printer receives more data. Then, the paper moves back down for printing (retracts to the initial print position). When printing stops, the paper advances to the tear-off position. ! The status of the Forms Tear-Off menu setting affects how you set the Top of Form. To determine the status of the Forms Tear-Off menu setting, refer to "Using Your Printer, Top of Form, Forms Tear-Off Status (ON or OFF)." For information on setting the Top of Form, refer to "Using Your Printer, Top of Form, Setting Top of Form, Forms Tear-Off (ON or OFF)." ! If the software package you are using "pauses" while sending data to the printer, Forms Tear Off may be activated (if it is enabled through the Menu). The pause must be for two or more seconds. No data is lost. Uneven print registration will occur due to the paper movement. If the problem occurs, use the menu to turn off this feature. ! DO NOT use Forms Tear Off with labels or multi-part forms! ! Forms Tear-Off CANNOT be used when the optional pull tractor is engaged. |52 Microline 320/321 Turbo/n
![](/manual_guide/products/oki-data-microline-320-turbo-users-guide-a89ffc0/52.png)