Oki MICROLINE 320 TURBO Users Guide - Page 64
Printer Reset
View all Oki MICROLINE 320 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Super Speed Draft Printer Reset To use Super Speed Draft (SSD), enter the Menu Mode and make changes as follows: 1 Press SHIFT + SEL. 2 Press GROUP twice. 3 Press SET until DRAFT prints as the setting for the Print Mode. 4 Press ITEM. 5 Press SET (SSD prints). 6 Press SHIFT + SEL to exit Menu Mode and save your changes. When you reset the printer, you reinitialize it. You will need to reset the printer to clear some error conditions To reset the printer: 1 Press and release the SEL key to take the printer off-line. The SEL light will be out. 2 Then, press and hold the SHIFT key and press the RESET (CHARACTER PITCH) key. 3 The printer is reset. ! Important! A printer reset is NOT the same as a reset to factory defaults. A printer reset reinitializes the printer, but does NOT affect any menu settings. A reset to factory defaults returns ALL menu settings to the factory defaults. |64 Microline 320/321 Turbo/n