Oki MICROLINE 320 TURBO Users Guide - Page 51
Changing the Forms Tear-Off Setting
![]() |
View all Oki MICROLINE 320 TURBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Changing the Forms Tear-Off Setting The default setting for Forms Tear-Off is OFF. 12 32T-FP.eps 3 4 5 SEL SEL MENU EXIT POWER SHIFT ALARM LF Micro Feed Down GROUP FF/LOAD TEAR Micro Feed Up ITEM SET MENU PARK PRINT QUIET TOF To change the Forms Tear-Off setting: 1 Press SEL (1) + SHIFT (2). 2 Press GROUP (3) until one of the following lines appears, depending on which paper feed you are using REAR FEED Form Tear-Off OFF BOTTOM FEED Form Tear-Off OFF 3 Press ITEM (4) until Form Tear-Off appears in the second column. 4 Press SET (5) until the time interval you wish to select appears in the third column. 5 Press SEL (1) + SHIFT (2) to exit Menu Mode and save the setting. ! The status of the Forms Tear-Off menu setting affects how you set the Top of Form. ! If the software package you are using "pauses" while sending data to the printer, Forms Tear-Off may be activated (if it is enabled through the Menu). The pause must be for two seconds or more. No data is lost. Uneven print registration will occur due to the paper movement. If the problem occurs, use the menu to turn off Forms Tear-Off. ! DO NOT use Forms Tear-Off with labels or multi-part forms! ! Forms Tear-Off CANNOT be used when the optional pull tractor is engaged. | User's Guide: English 51
![](/manual_guide/products/oki-data-microline-320-turbo-users-guide-a89ffc0/51.png)