Olympus MAUSB-10 Reference Manual - Page 49

Troubleshooting Macintosh PROBLEM The status lamp (green) does not light. 1 No card icon(s) appears on the computer's screen. 2 You can read a card, but not 3 write to it. You cannot write with a 4 SmartMedia. The error message "File 5 Sharing is invalid." appears. CAUSE The card(s) is not inserted correctly. The card cover is not closed properly. The power supply from the USB port is insufficient. The card(s) is damaged. The driver was not installed correctly. The card(s) is not inserted correctly. File Exchange is not installed on your computer. There is a problem with the card. A write-protect seal is affixed to the card. Your card memory is full. (* This error message appears when File Sharing is on.) SOLUTIONS Make sure that the card(s) is inserted correctly. Close the card cover properly. REF. PAGE 36 36 If you are using a USB hub, it may not function properly with the MAUSB-10. Connect the MAUSB- 5 10 directly to the computer. Replace the card(s) with a new one(s). - Try to install the driver again, 33 referring to the instructions. 41 Make sure that the card(s) is inserted correctly. 36 You must have File Exchange (provided with Mac OS) to read/ write a DOS/Windows formatted card. (Check Control Panels under 32 the Apple menu to see if File Exchange is installed. For more details, refer to Mac OS "Help".) Copy the data to a different card, then use the new card for writing. - Remove the write-protect seal. For more details, refer to the 38 SmartMedia instruction manual. Click [OK], then replace the card or delete files on the card to make - more space available. 49