Onkyo PR-SC5508 Owner Manual - Page 46

Note • For composite video, S-Video, and component video upconversion for the HDMI output, the "Monitor Out" setting must be set to other than "Analog" (➔ 44), and the "HDMI Input" setting must be set to See "Video Connection Formats" for more information on video signal flow and upconversion (➔ 23). • If no video component is connected to HDMI output (even if the HDMI input is assigned), the AV controller selects the video source based on the setting of "Component Video Input". • When an HDMI IN is assigned to an input selector as explained here, the same HDMI IN will be set as a priority in the "Digital Audio Input" (➔ 47). In this case, if you want to use the coaxial or optical audio input, make the selection in the "Audio Selector" in the Home menu (➔ 64). • "TUNER" selector cannot be assigned and is fixed at the option. • If you connect a component (such as UP-A1 Dock that seated iPod) to UNIVERSAL PORT jack, you cannot assign any input to "PORT" selector. • Do not assign the component connected with the HDMI input to "TV/CD" selector when you set "TV Control" setting to "On" (➔ 61). Otherwise, appropriate CEC (Consumer Electronics Control) operation will not be guaranteed. Component Video Input If you connect a video component to a component video input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to COMPONENT VIDEO IN 2, you must assign "IN 2" to the "BD/DVD" input selector. If you've connected your TV to the AV controller with a component video cable, you can set the AV controller so that composite video and S-Video sources are upconverted* and output by the COMPONENT VIDEO MONITOR OUT*1. You can set this for each input selector by selecting the option. Composite video, S-Video Component video IN OUT Composite video, S-Video Component video *1 This applies only when "Monitor Out" setting is set to "Analog" (➔ 44). Here are the default assignments. Input selector BD/DVD VCR/DVR CBL/SAT GAME PC AUX TAPE TUNER TV/CD PHONO PORT Default assignment IN 1 ----IN 2 IN 3 Fixed ■ BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX, TAPE, TV/CD, PHONO, PORT ` IN 1, IN 2, IN 3: Select a corresponding component video input that the video component has been connected Select if you are using HDMI output, rather than the COMPONENT VIDEO MONITOR OUT, for the output from composite video, S-Video, and component video sources. Note • For composite video and S-Video upconversion for the COM- PONENT VIDEO MONITOR OUT, the "Monitor Out" set- ting must be set to "Analog" (➔ 44), and the "Component Video Input" setting must be set to See "Video Con- nection Formats" for more information on video signal flow and upconversion (➔ 23). • If not connected to the same output you have selected in the "Monitor Out" setting, the "Monitor Out" setting will be auto- matically switched to "Analog" (➔ 44). • "TUNER" selector cannot be assigned and is fixed at the "- - - - -" option. • If you connect a component (such as UP-A1 Dock that seated En iPod) to the UNIVERSAL PORT jack, you cannot assign any 46 input to "PORT" selector.